How to Caulk a Bathtub Tips

By

If you are planning on caulking your bathtub, it is definitely important that you do it the right way. You definitely do not want to do a bad job and end up with a bathtub that leaks. Doing a bad job on caulking your tub could result in leaks that ruin the floor or the walls, and it can also cause molds and mildew to form as well, which can be dangerous to your health. Knowing some how to caulk bathtub tips can help you make sure that you do a great job so you will not have to worry about any problems with your tub in the future.


Tip #1 – Remove Old Caulking

One of the most important how to caulk bathtub tips is to make sure that you totally remove any old caulking that may be on the tub. You can purchase special solvents that will help you get rid of the old caulking, and you can also use a sharp knife or razor blade to get rid of any extra. Then you should use a cleanser on the tub to make sure all remnants of the old caulking is gone.

Tip #2 – Make Sure the Area is Dry

You will also want to be sure that the area you are going to caulk is dry. Be sure to dry it off thoroughly after you have washed the rest of the old caulking away. If the area is wet, then you may have a problem with the new caulking setting as it should.

Tip #3 – Use Masking Tape to Mark the Area

Another of the many how to caulk a bathtub tips is to use masking tape to mark of the area you are going to caulk. This will give you a more professional look and help make sure that caulk does not get where it’s not supposed to.

Tip #4 – Fill the Tub

Before you begin caulking the tub, it is important that you fill up the tub with water. The weight of the water in the tub will help pull the tub away from the wall so you can get into the seams. If you fail to use this tip, more than likely when you do fill the tub up with water the weight will pull the tub away from the wall causing your caulking to crack.

Tip #5 – Be Sure to Fill Gaps

Making sure that you fill the gaps up is another of the important how to caulk a bathtub tips you need to remember. You can simply wet your finger and then use it to fill in any gaps you may see.

Tip #6 – Dry for 24 Hours

Once you have totally caulked the tub, then you will want to make sure that you dry it for at least 24 hours before you decide to use it again. This will help you make sure that the caulking has set before it gets wet.

Leave a Reply